How To Use

How to use this firewood bundle:

You MUST allow these unseasoned logs to naturally air dry until a moisture content of 20% or below has been met. For your safely, NEVER BURN UNSEASONED LOGS.

Here’s the golden rule: use the softwood logs to get a fire going and use the hardwood logs to keep a fire going.

How to get started:

To start your fire using our Two’s Company Logs Bundle just follow these simple steps:

1. Grab a handful of kindling and place inside your wood burning stove.
2. Get 1-2 firelighters and nestle between your kindling. Light the firelighters, and wait for the kindle to take light.
3. Once your kindling is alight add a ready to burn softwood log from your green net and wait for it to take light. Be careful not to smother your kindling though.
4. Repeat step 3 by adding 1-2 more ready to burn softwood logs and build your fire up.
5. Once you have a roaring fire, add 1-2 kiln dried hardwood logs to make your fire last for longer. Use the hardwood to keep your fire going.
6. Sit back and enjoy!

Please note that these tips do not replace the advice provided by your stove manufacturer or stove fitter.

Where We Deliver

Where we deliver our Unseasoned Logs:

We deliver our Unseasoned Logs in bulk bags to all our delivery areas. The minimum order requirement is 3 bags to remain legally compliant – but the more you buy the more you save!

We offer FREE DELIVERY to:

• Ceiriog Valley (including Llangollen, Glyn Ceiriog, Llwynmawr, Pandy, Pontfadog)
• Chester
• Chirk
• Ellesmere
• Ellesmere Port
• Flintshire
• Frodsham
• Liverpool
• Malpas
• Oswestry
• Shrewsbury
• Welshpool
• Whitchurch
• Wirral
• Wrexham

And all areas in between! But if you want to do a quick check just give us a call on 01691 887977 or click on the chat feature so we can guide you from there.

How long to season firewood

Wondering how long it takes to season firewood yourself? Here’s a quick overview:

Softwood usually needs between 6 and 12 months to dry, while hardwood logs typically takes about 12 to 24 months. Still, it’s always a good idea to check the moisture levels have reached 20% or less to ensure you’re achieving the most efficient, clean and hottest burn from your logs.

Unseasoned Firewood Stacking Guide

Here are our top tips to level up your wood stacking skills for optimal firewood seasoning:

• Place logs in a log store: a purpose-built log store is the best place to season your firewood. Position your log store in direct sunlight (ideally south-facing), ensuring it has good airflow and is easily accessible. Most log stores are open at the front, have a slanted roof, and come with a raised floor to keep your logs off the ground.
• Protect from the elements: To shield your logs from rain, snow, and ice, use a weatherproof firewood cover or a sheet of tarpaulin. However, when the weather is dry and sunny, remove the cover to allow ample ventilation around your logs. This prevents them from sweating and helps to optimise drying time.
• Select the right location: While it’s important to store logs with plenty of sunlight with good airflow, avoid placing them in areas exposed to excessive wind that could blow in rain. Carefully consider the location to balance sun exposure and protection from the elements.
• Avoid overhead branches: Ensure your log store is placed away from any overhanging branches. Rainwater dripping from branches can soak your logs, compromising their dryness and burn quality. After all, there’s no point buying kiln dried logs that are ready for immediate use if they’re only going to get wet again.
• Keep off the grass: Never dump your logs onto the grass. Logs can absorb moisture from the ground like a sponge, affecting their ability to burn efficiently. Always stack your logs properly in a well-located log store immediately after delivery.
• Stacking technique: Stack your logs in a crisscross pattern. This method enhances airflow, ensuring your logs remain dry and well-ventilated. Proper stacking also helps prevent the pile from toppling over.
• Regular Rotation: Rotate your logs periodically. Use the “first in, first out” method to ensure the oldest logs are used first, maintaining the overall quality of your firewood supply.
• Maintain Cleanliness: Keep the area around your log store clean and free from debris. This not only helps in maintaining good airflow but also reduces the chances of pests making a home in your firewood.
• Pest Control: Check your log store regularly for signs of pests. If you notice any infestation, take immediate action to prevent damage to your logs. Using natural repellents can be an effective measure.
• Elevate Individual Logs: For extra protection, consider placing individual logs on small pallets or racks within the store. This further prevents ground moisture from seeping into the logs.

DISCLAIMER

*This advice is for guidance only. Once our logs are in your care and stored away, we cannot control their condition or how they will burn afterwards.

How to check your firewood is dry